from
$66.95
from
$98.95
Manufactured from aircraft-grade 356 aluminum alloywith T51 heat treatment, the castings provide superior strength, corrosion resistance, and long service life in harsh outdoor environments.
Durable ¾″ fiberglass rodsare epoxied directly into the aluminum castings, allowing the banner to flex and absorb up to 25% of wind load, reducing stress on both banners and hardware.
Incredibly easy to install with identical top and bottom arms that eliminate installation confusion, while integrated zip-tie tie-off points and a 2-degree cantensure a tighter, more professional banner display.
Trusted in tens of thousands of installations across North America, the Jr. Windspill® Street Pole Banner Bracketis the industry-standard solution for mounting single or double outdoor banners on lamp posts, utility poles, and flat surfaces. Designed for long-term outdoor performance, this wind-resistant banner bracket system delivers exceptional durability, stability, and value—with many installations still performing reliably after 20+ years in the field.
This street pole banner bracket installs on round, square, octagonal, or tapered poleswith a minimum diameter of 1½″, and can also be lag-bolted to wooden posts or flat surfaces—making it a versatile choice for nearly any installation.
Street Pole Banners Product Details
Trusted in tens of thousands of installations across North America, the Jr. Windspill® Street Pole Banner Bracket is the industry-standard solution for mounting single or double outdoor banners on lamp posts, utility poles, and flat surfaces. Designed for long-term outdoor performance, this wind-resistant banner bracket system delivers exceptional durability, stability, and value—with many installations still performing reliably after 20+ years in the field.
Engineered with flexible fiberglass arms and heavy-duty cast aluminum components, the Jr. Windspill® bracket reduces wind load while maintaining a clean, professional banner presentation. Its streamlined design makes it ideal for municipalities, automotive dealerships, campuses, and commercial streetscapes seeking dependable pole banner mounting hardware that’s easy to install and built to last.
Note: “Jr.” refers to the product’s compact, efficient design—not reduced strength or performance.
Manufactured from aircraft-grade 356 aluminum alloy with T51 heat treatment, the castings provide superior strength, corrosion resistance, and long service life in harsh outdoor environments.
Durable ¾″ fiberglass rods are epoxied directly into the aluminum castings, allowing the banner to flex and absorb up to 25% of wind load, reducing stress on both banners and hardware.
This street pole banner bracket installs on round, square, octagonal, or tapered poles with a minimum diameter of 1½″, and can also be lag-bolted to wooden posts or flat surfaces—making it a versatile choice for nearly any installation.
Choose the setup that best fits your banner program:
Adjustable Bracket Kit – Includes two arms with castings, two back plates, and four self-locking bolts (1″ × ⅜″), allowing 1″ of vertical travel to accommodate banner height variations.
Fixed Bracket Kit – Includes two arms with pre-attached castings for straightforward, permanent installations.
Identical top and bottom arms eliminate installation confusion, while integrated zip-tie tie-off points and a 2-degree cant ensure a tighter, more professional banner display.
With no moving parts, there’s nothing to wear out or fail. All safety features are built into the design—no additional pins or safety hardware required.
Municipal street banner programs
Automotive dealership lamp post banners
University and campus signage
Retail corridors and downtown districts
Seasonal or year-round outdoor banner displays
Street Pole Banner Sizing
Street pole banners are generally made in common sizes, however adjustments may need to be made if you already have banner brackets installed onto your lamp posts.
Common Sizes Include:
All of the above sizes may need adjustment of 1 or 2 inches, depending on the exact installation spacing of your existing brackets. Don't see the size you need above or in our product selection? Green Valley Flags is able to custom make your street banners in any size. Visit our custom street banner page here for more details
Street Pole Banner Installation
Street pole banners are installed onto banner arm hardware which is fixed to a lamp post or pole of some sort. There are a few different kinds of banners brackets on the market, all of which are relatively similar
Fixed Street Pole Banner Brackets
For these brackets, it is very important to measure your poles well prior to ordering
It is imperative to use a zip tie to attach the inner grommets to the banner bracket, unless you have finials at the end of the banner bracket to prevent the banners from sliding off.
Adjustable Street Pole Banner Brackets
It is imperative to use a zip tie to attach the inner grommets to the banner bracket, unless you have finials at the end of the banner bracket to prevent the banners from sliding off.
Street Pole Banners are subject to all kinds of harsh weather conditions. The longevity of a street pole banner is largely determined by the way it was installed. Green Valley Flags does not provide a warranty on its street pole banners specifically because the installation method plays a major role in any potential material failures that may present in the future.
How can you make sure your street banners last?
Banner Production and Shipping
Accordion content
Once ordered, you will receive a proof within 24 -36 hours, depending in if you are ordering from our stock catalogue or if you require custom designing.
Once proofs are approved, street pole banners require 10 business days for production and then an additional 5 business days for shipping
At Green Valley Flags, we want you to be satisfied when you receive your products. All custom products are tailor made to your specifications, as such there is potential for human error, however minimal. Under normal circumstances, our quality control department would pick up on it but sometimes things slip through and the order is dispatched. You might be wondering, what do I do incase of a manufacturing defect?
If our products are faulty in any way, you can return them within 14 days of receipt. You can contact our customer service department by emailing info@greenvalleyflags.com. Let us know your name, order number and concern and we will respond quickly to resolve your issues. We ask you provide a digital image of the fault in your product as well as a clear description of the problem.
In most cases, we will be able to resolve your issue via email. If the fault cannot be verified, you may need to return your product to us for inspection.
With regards to all products, we cannot accept the returns of non-defective products. We produce all of our products, including stock-design banners, as and when orders are placed. This means that every order, regardless of customization or not, was specifically produced for the customer and cannot be returned or re-stocked for resale at a later date. Unless the product is defective or there is evidence of poor workmanship, no products can be returned or exchanged.
Prior to Production - Sometimes you may purchase a product but quickly decide that you do not wish to go through with the purchase. We wait 1 hour after you place an order/ approve a proof to start manufacturing. If you contact a representative by phone only within the first hour then we will be able to cancel your order and issue a refund for the full amount.
If you have any questions, doubts, concerns or things you wish to discuss about the product, feel free to give our team a call to address your concerns.
After Receipt of Goods - If you receive your goods and you are unhappy for any reason, please do let us know, we will be happy to review and correct anything that was a result of our oversight or poor workmanship. We value feedback and strive to improve our service in all ways possible. To avoid being unhappy with your item be sure to double check the following:
Within an Hour of Purchase - We wait one hour after you place your order (stock designs)/ approve your proof (customized deisgns) before we start making it. Within this hour, you may contact us via phone if you wish to edit or change your mind and we can issue you a full refund
An Hour after Purchase - We custom make each product to order and due to the efforts and materials that go into each banner, we cannot cancel an order once the product goes into production. If you wish to cancel your order prior to the start of production, there will be a 35% charge of the cost of items.
